The price is for One cover for the front steer axle, as shown.
This
Genuine Eagle® rim cover fits a 22.5″ X 6.75″, 22.5″ x 8.25″, 22.5 X
7.5″ hub-piloted painted steel wheel with eight lugs and four vent
holes that have a 275mm bolt circle with a noted wheel number.
Note: Hub-piloted steel wheels have a built-in integrated washer on the backside of the lug nuts. (see the photo and please verify lug nut type at your vehicle)
Fits Accuride and Maxion brand steel painted front wheels (a magnet sticks) Specific fit to wheel numbers: 28484; 88884E or 89920E
The included mounting hardware is for 22mm wheel studs. Please verify at your vehicle your wheel stud size with a caliper or metric wrench before ordering to ensure mounting hardware fitment.
Important: Your vehicle could have 20mm or 22mm wheel studs! If your vehicle has 20mm wheel studs, the attachment hardware that ships with this cover will Not Fit. In that case, please contact us, and we’ll be happy to direct you to the correct item.
Alternate Ways To Determine Your Wheel Stud Size:
The
price is for ONE cover for the front steer axle, as shown. It
includes our Lifetime Finish Warranty, mounting hardware, installation
tool, Eagle trademark resin center emblems, and shipping within the
contiguous 48 U.S.A. states.
This cover features our state-of-the-art over lug attachment system that bolts onto your wheel without lug nut removal. This state-of-the-art attachment system eliminates the mounting hassle of the now obsolete under the lug mount, typically referred to as bolt-on, which required removal of lug nuts to install. Our “over the lug” mount system is now used widely on heavy commercial trucks.
Necessary: Please verify your wheel size, wheel number, wheel stud size, lug nut count, and wheel hand hole count before ordering to ensure fitment.
To check your wheel number, look on the steel wheel’s exposed side, between the lug nuts, or about an inch from the rim edge.
Verifying this number is the best way to ensure fit. Ordering by make, model, or year has often proven unreliable due to several factory wheel/tire options typically available for any given vehicle model year.
We do not sell knock-off generic, unbranded wheel covers that loosely fit a broad range of specifications. Squeaks and rattles can be a result of a poor fit of wheel covers over steel wheels. In contrast, our line of covers has match the specifications of actual wheel numbers in use on given make, model, and year vehicles. This significant attention to detail has enabled us to provide a complete line of wheel covers that set the standard for precise fitment to O.E.M. wheel specifications, thereby ensuring our product’s long-term, trouble-free performance.
Verifying that your wheel stud size, wheel number, lug nut count, wheel hand hole count, and wheel lug nut type (hub-pilot or stud-pilot) match our product description will ensure your new wheel cover will fit perfectly. Please do not rely just on vehicle make, model, and year or memory (if the truck or trailer is currently not available), as this can result in mistakenly ordering the wrong set of wheel covers. We do not want this to happen to you, so please take the time to physically check your wheels to ensure they match the given description before ordering.
If you need assistance, please contact us, and we will be happy to help. Please include the following information in your correspondence. 1. Your wheel number, including any other stamped rim numbers 2. The vehicle make, model, and year 3. Your wheel lug nut count and hand count
For steel painted wheels only (a magnet sticks) – WILL NOT FIT ALUMINUM WHEELS.
Manufactured from our Finest Grade, never rust bright polished stainless steel, and backed by our lifetime warranty. We do not use anything but the best quality stainless to avoid the cracking and yellow tint discoloration common to lower quality generic unbranded knock-off covers. Unlike low-quality stainless that often will rust over time with exposure, Our rim covers will never rust in any climate and rival chrome in appearance. In the event of damage or an accident, we also make available single covers or hardware to our customers, so you can fix what is required, rather than be forced into buying a whole new set.
Our included trademark high-quality resin bubble center emblems dress up the appearance when installed and are your assurance you have purchased a Genuine Eagle Flight cover.
Eagle Flight covers meet the highest ISO quality standards. Meeting such stringent world-renowned manufacturing standards is rare in our industry and assures the highest fit and finish level. Every one of our Eagle Flight covers will look the same as the day of installation when the vehicle is retired from service and will never rust or turn yellow over time.
Low quality, unbranded knock-off stainless wheel covers rust and yellow over time and typically do not have a warranty or a minimal one at best.
Eagle Flight® brand covers are backed by our Lifetime Warranty, which serves as your assurance you have purchased the highest quality with the best fit and finish available. We do not sell inferior quality generic knock-off wheel rim covers. © autoenhance.com All Rights Reserved – including images, text, and product page titles.
$238.85
5 in stock
The price is for One cover for the front steer axle, as shown.
This
Genuine Eagle® rim cover fits a 22.5″ X 6.75″, 22.5″ x 8.25″, 22.5 X
7.5″ hub-piloted painted steel wheel with eight lugs and four vent
holes that have a 275mm bolt circle with a noted wheel number.
Note: Hub-piloted steel wheels have a built-in integrated washer on the backside of the lug nuts. (see the photo and please verify lug nut type at your vehicle)
Fits Accuride and Maxion brand steel painted front wheels (a magnet sticks) Specific fit to wheel numbers: 28484; 88884E or 89920E
The included mounting hardware is for 22mm wheel studs. Please verify at your vehicle your wheel stud size with a caliper or metric wrench before ordering to ensure mounting hardware fitment.
Important: Your vehicle could have 20mm or 22mm wheel studs! If your vehicle has 20mm wheel studs, the attachment hardware that ships with this cover will Not Fit. In that case, please contact us, and we’ll be happy to direct you to the correct item.
Alternate Ways To Determine Your Wheel Stud Size:
The
price is for ONE cover for the front steer axle, as shown. It
includes our Lifetime Finish Warranty, mounting hardware, installation
tool, Eagle trademark resin center emblems, and shipping within the
contiguous 48 U.S.A. states.
This cover features our state-of-the-art over lug attachment system that bolts onto your wheel without lug nut removal. This state-of-the-art attachment system eliminates the mounting hassle of the now obsolete under the lug mount, typically referred to as bolt-on, which required removal of lug nuts to install. Our “over the lug” mount system is now used widely on heavy commercial trucks.
Necessary: Please verify your wheel size, wheel number, wheel stud size, lug nut count, and wheel hand hole count before ordering to ensure fitment.
To check your wheel number, look on the steel wheel’s exposed side, between the lug nuts, or about an inch from the rim edge.
Verifying this number is the best way to ensure fit. Ordering by make, model, or year has often proven unreliable due to several factory wheel/tire options typically available for any given vehicle model year.
We do not sell knock-off generic, unbranded wheel covers that loosely fit a broad range of specifications. Squeaks and rattles can be a result of a poor fit of wheel covers over steel wheels. In contrast, our line of covers has match the specifications of actual wheel numbers in use on given make, model, and year vehicles. This significant attention to detail has enabled us to provide a complete line of wheel covers that set the standard for precise fitment to O.E.M. wheel specifications, thereby ensuring our product’s long-term, trouble-free performance.
Verifying that your wheel stud size, wheel number, lug nut count, wheel hand hole count, and wheel lug nut type (hub-pilot or stud-pilot) match our product description will ensure your new wheel cover will fit perfectly. Please do not rely just on vehicle make, model, and year or memory (if the truck or trailer is currently not available), as this can result in mistakenly ordering the wrong set of wheel covers. We do not want this to happen to you, so please take the time to physically check your wheels to ensure they match the given description before ordering.
If you need assistance, please contact us, and we will be happy to help. Please include the following information in your correspondence. 1. Your wheel number, including any other stamped rim numbers 2. The vehicle make, model, and year 3. Your wheel lug nut count and hand count
For steel painted wheels only (a magnet sticks) – WILL NOT FIT ALUMINUM WHEELS.
Manufactured from our Finest Grade, never rust bright polished stainless steel, and backed by our lifetime warranty. We do not use anything but the best quality stainless to avoid the cracking and yellow tint discoloration common to lower quality generic unbranded knock-off covers. Unlike low-quality stainless that often will rust over time with exposure, Our rim covers will never rust in any climate and rival chrome in appearance. In the event of damage or an accident, we also make available single covers or hardware to our customers, so you can fix what is required, rather than be forced into buying a whole new set.
Our included trademark high-quality resin bubble center emblems dress up the appearance when installed and are your assurance you have purchased a Genuine Eagle Flight cover.
Eagle Flight covers meet the highest ISO quality standards. Meeting such stringent world-renowned manufacturing standards is rare in our industry and assures the highest fit and finish level. Every one of our Eagle Flight covers will look the same as the day of installation when the vehicle is retired from service and will never rust or turn yellow over time.
Low quality, unbranded knock-off stainless wheel covers rust and yellow over time and typically do not have a warranty or a minimal one at best.
Eagle Flight® brand covers are backed by our Lifetime Warranty, which serves as your assurance you have purchased the highest quality with the best fit and finish available. We do not sell inferior quality generic knock-off wheel rim covers. © autoenhance.com All Rights Reserved – including images, text, and product page titles.
$238.85
5 in stock
The
price is for One cover for the front steer axle, as shown.
This
Genuine Eagle® rim cover fits a 22.5″ X 6.75″, 22.5″ x 8.25″, 22.5 X
7.5″ hub-piloted painted steel wheel with eight lugs and four vent
holes that have a 275mm bolt circle with a noted wheel number.
Note:
Hub-piloted steel wheels have a built-in integrated washer on the
backside of the lug nuts. (see the photo and please verify lug nut type
at your vehicle)
Fits Accuride and Maxion brand steel painted front wheels (a magnet sticks) Specific fit to wheel numbers: 28484; 88884E or 89920E
The
included mounting hardware is for 22mm wheel studs. Please verify at
your vehicle your wheel stud size with a caliper or metric wrench before
ordering to ensure mounting hardware fitment.
Important: Your vehicle could have 20mm or 22mm wheel studs! If
your vehicle has 20mm wheel studs, the attachment hardware that ships
with this cover will Not Fit. In that case, please contact us, and we’ll
be happy to direct you to the correct item.
Alternate Ways To Determine Your Wheel Stud Size:
Another
way to determine your wheel stud size is if you have 20mm wheel studs –
a 7/8″ wrench will loosely fit over the wheel stud protrusion above the
lug nut.
However, if you have 22mm wheel studs, a 7/8″ wrench will fit correctly over the stud protrusion above the lug nut.
The
price is for ONE cover for the front steer axle, as shown. It
includes our Lifetime Finish Warranty, mounting hardware, installation
tool, Eagle trademark resin center emblems, and shipping within the
contiguous 48 U.S.A. states.
This
cover features our state-of-the-art over lug attachment system that
bolts onto your wheel without lug nut removal. This state-of-the-art
attachment system eliminates the mounting hassle of the now obsolete
under the lug mount, typically referred to as bolt-on, which required
removal of lug nuts to install. Our “over the lug” mount system is now
used widely on heavy commercial trucks.
Necessary:
Please verify your wheel size, wheel number, wheel stud size, lug nut
count, and wheel hand hole count before ordering to ensure fitment.
To check your wheel number, look on the steel wheel’s exposed side, between the lug nuts, or about an inch from the rim edge.
Verifying
this number is the best way to ensure fit. Ordering by make, model, or
year has often proven unreliable due to several factory wheel/tire
options typically available for any given vehicle model year.
We
do not sell knock-off generic, unbranded wheel covers that loosely fit a
broad range of specifications. Squeaks and rattles can be a result of a
poor fit of wheel covers over steel wheels. In contrast, our line of
covers has match the specifications of actual wheel numbers in use on
given make, model, and year vehicles. This significant attention to
detail has enabled us to provide a complete line of wheel covers that
set the standard for precise fitment to O.E.M. wheel specifications,
thereby ensuring our product’s long-term, trouble-free performance.
Verifying
that your wheel stud size, wheel number, lug nut count, wheel hand hole
count, and wheel lug nut type (hub-pilot or stud-pilot) match our
product description will ensure your new wheel cover will fit perfectly.
Please do not rely just on vehicle make, model, and year or memory (if
the truck or trailer is currently not available), as this can result in
mistakenly ordering the wrong set of wheel covers. We do not want this
to happen to you, so please take the time to physically check your
wheels to ensure they match the given description before ordering.
If
you need assistance, please contact us, and we will be happy to help.
Please include the following information in your correspondence. 1. Your
wheel number, including any other stamped rim numbers 2. The vehicle
make, model, and year 3. Your wheel lug nut count and hand count
For steel painted wheels only (a magnet sticks) – WILL NOT FIT ALUMINUM WHEELS.
Manufactured
from our Finest Grade, never rust bright polished stainless steel, and
backed by our lifetime warranty. We do not use anything but the best
quality stainless to avoid the cracking and yellow tint discoloration
common to lower quality generic unbranded knock-off covers. Unlike
low-quality stainless that often will rust over time with exposure, Our
rim covers will never rust in any climate and rival chrome in
appearance. In the event of damage or an accident, we also make
available single covers or hardware to our customers, so you can fix
what is required, rather than be forced into buying a whole new set.
Our
included trademark high-quality resin bubble center emblems dress up
the appearance when installed and are your assurance you have purchased a
Genuine Eagle Flight cover.
Eagle
Flight covers meet the highest ISO quality standards. Meeting such
stringent world-renowned manufacturing standards is rare in our industry
and assures the highest fit and finish level. Every one of our Eagle
Flight covers will look the same as the day of installation when the
vehicle is retired from service and will never rust or turn yellow over
time.
Low
quality, unbranded knock-off stainless wheel covers rust and yellow
over time and typically do not have a warranty or a minimal one at best.
Eagle
Flight® brand covers are backed by our Lifetime Warranty, which serves
as your assurance you have purchased the highest quality with the best
fit and finish available. We do not sell inferior quality generic
knock-off wheel rim covers. © autoenhance.com All Rights Reserved –
including images, text, and product page titles.
| Weight | 18.00 lbs |
|---|---|
| Dimensions | 24.00 × 24.00 × 7.00 in |
| Non-Domestic Product | |
| Custom Bundle | |
| Manufacturer Part Number | |
| Material | |
| ALL OVER THE LUG MOUNT RIM COVERS | |
| 22.5 WHEEL SIMULATORS | |
| Vintage Part | |
| Modified Item | |
| Placement on Vehicle | |
| Brand | |
| Type | |
| Manufacturer Warranty | |
| Number in Pack | |
| Features | |
| Universal Fitment | |
| Finish | |
| Compatible Wheel Diameter | |
| Performance Part |
Our D.O.T. approved, extensive wheel cover line is widely known for industry-leading quality, lasting durability, and precision fit. Eagle Flight® simulators are manufactured from the highest quality polished stainless steel that rivals chrome in appearance, and will never rust, crack, or turn yellow. Every set we offer will provide many years of maintenance-free great looks, backed up with our Lifetime Warranty. We have been in the wheel cover business since 1979.
We have a full line available in sizes ranging from 16″ through 24.5″ to fit nearly every make and model van, truck and trailer on the road today. Installation is simple as 1-2-3 if you choose our Easy No Lug Removal sets. Most applications are available with no lug removal, bolt-on retention.
We also offer Universal Wheel Simulators that will fit virtually all 17.5″, 19.5″, and 22.5″ wheels, including demountable (spoke) wheels. We are proud to be one of the largest manufacturers of wheel simulators in the United States, with both single wheel and dual wheel applications. If you have a question, please feel free to contact us.
Additionally, Eagle Flight manufactures various licensed OEM covers. We are proud of the fact that in today’s world of low quality unbranded stainless knock-offs, we have earned the right to produce licensed OEM wheel covers to vehicle manufacturers exacting specifications.
We offer free shipping within the contiguous 48 states of the USA. Outside of this area, please contact us to get a shipping quote for your location if you do not see the shipping calculator on this page.
Most applications are available with No Lug Removal bolt-on retention. All that you do is position the wheel simulators on your wheel and install the included jam nuts onto the stud protruding from your lug nut. Some applications require using included stud extenders, but installation is always quick and secure.
Our covers include everything noted in the product description section of this page.
Please, take the time to confirm that your rims match our description before ordering for a precise fit.
Yes, replacement parts are available for our simulator sets by emailing us your contact and vehicle information.
All our Eagle Flight® wheel simulators come with a Genuine Eagle Lifetime Finish Warranty when purchased directly from us. After ordering, you will receive a separate receipt from us documenting your purchase, which also serves as validation of your warranty.
We are always happy to help by verifying you are ordering correctly if in doubt. In this case, please email us all of the following information: your wheel number (see picture), make, model, year, wheel size, lug nut count, and hand hole count (see picture) and we will review and advise. We can also review clear emailed photos of your wheels when necessary. Our goal is to deliver what you order, promptly, so that you will receive covers that fit correctly, the first time. Our descriptions are precise to ensure that will be the case so that you will 100% satisfied with every purchase you receive from us. Our covers have a lifetime warranty, will look terrific, and provide trouble-free performance for the life of your trailer, truck, or van. © autoenhance.com All Rights Reserved – including images, text, and product page titles. QC1
Copyright 2025 © Automotive Enhancement | Design By Beverly Hills FL Website Service
