The price is for one rear Genuine Eagle® rim cover as shown – not a pair.
This Genuine Eagle® rear wheel rim liner cover fits the hub-piloted steel dual rear wheel size 22.5″x 7.5″ or 8.25″ with eight lugs, and four-hand holes with a 275mm bolt circle and 22mm wheel studs.
Important Note: The stamped wheel width must be verified before ordering. This cover will not fit 22.5″ x 6.75″ wheels.
It includes mounting hardware, installation tool, trademark Eagle resin center emblem, and shipping. Please be informed that we will no longer process orders for shipment outside of this area, and we do not ship to P.O. boxes, sorry.
Hub-piloted steel wheels have a built-in washer on the backside of the lug nuts – see the image.
This cover features our state of the art over the lug attachment system that bolts onto your wheel without lug nut removal. This attachment system eliminates the hassle of the now obsolete, under the lug mount, commonly referred to as “bolt-on,” that required the removal of lug nuts to install. Our over the lug mount attachment system is now used on heavy trucks nationwide.
Important: some wheel numbers noted may have different wheel stud sizes depending on the vehicle build specifications. Over 90% of the vehicles requiring this set have 22mm wheel studs, less than 10% have 20mm wheel studs.
22mm retention hardware is standard and is what we will ship unless you tell us to send 20mm.
Important: If you have 20mm wheel studs, please be sure to leave us a note at check out.
This required information will enable us to ship the correct mounting hardware for your truck, avoiding a costly needless return to swap out to different sized hardware. Please note that we will not be responsible for additional shipping charges to swap installation hardware if you have 20mm wheel studs, and do not tell us.
You can verify your wheel stud size with a wrench, or caliper. If a 7/8″ wrench fits over the wheel stud, you have 22mm studs. Also, if you place a 13/16” socket over the wheel stud, it will NOT slide over a 22mm
Please verify your wheel stud size, lug nut type, and wheel number before ordering so that we can ship the correct hardware for your vehicle.
Specific fit to wheel numbers: 90614E; 28415; 28484; 88884E or 89920E
To confirm your wheel number, look on the exposed side of the steel wheel, between the lug nuts, or about an inch from the rim edge. Verifying this number is the best way to ensure fit. Ordering by make, model, or year has often proven unreliable due to several factory wheel/tire options typically available for any given vehicle model year.
We do not sell knock-off generic, unbranded wheel covers that loosely fit a broad range of specifications. Squeaks and rattles can be a result of a poor fit of wheel covers over steel wheels.
In contrast, our line of covers matches the precise specifications of O.E.M. wheel numbers. This significant attention to detail has enabled us to set the standard for perfect fitment, thereby ensuring long-term, trouble-free performance.
Verifying that your wheel number, lug nut count, wheel hand hole count, and wheel lug nut type (hub-pilot or stud-pilot) matches our product description will ensure that your new wheel covers will fit perfectly. Please do not rely on vehicle make, model, and year or memory (if the truck or trailer is currently unavailable), as this can result in mistakenly ordering the wrong set of wheel covers. We do not want this to happen to you, so please take the time to physically check your wheels to ensure they match the given description before ordering.
If you need assistance, please contact us, and we will be happy to help. Please include the following information with your correspondence. 1. Your wheel number, including any other stamped rim numbers 2. The vehicle make, model, and year 3. Your wheel lug nut count and hand count
For steel painted wheels only (magnet sticks) – WILL NOT FIT ALUMINUM WHEELS.
Manufactured from our Finest Grade, never rust bright polished stainless steel, and backed by our lifetime warranty. We do not use anything but the best quality stainless to avoid the cracking and yellow tint discoloration that is common to lower quality generic unbranded knock-off covers.
Low quality, unbranded knock-off stainless wheel covers rust and yellow over time and typically do not have a warranty or a minimal one at best.
Eagle Flight® brand covers are backed by our Lifetime Warranty, which serves as your assurance you have purchased the highest quality with the best fit and finish available. We do not sell inferior quality generic knock-off wheel rim covers. © autoenhance.com All Rights Reserved – including images, text, and product page titles.
$308.70
3 in stock
The price is for one rear Genuine Eagle® rim cover as shown – not a pair.
This Genuine Eagle® rear wheel rim liner cover fits the hub-piloted steel dual rear wheel size 22.5″x 7.5″ or 8.25″ with eight lugs, and four-hand holes with a 275mm bolt circle and 22mm wheel studs.
Important Note: The stamped wheel width must be verified before ordering. This cover will not fit 22.5″ x 6.75″ wheels.
It includes mounting hardware, installation tool, trademark Eagle resin center emblem, and shipping. Please be informed that we will no longer process orders for shipment outside of this area, and we do not ship to P.O. boxes, sorry.
Hub-piloted steel wheels have a built-in washer on the backside of the lug nuts – see the image.
This cover features our state of the art over the lug attachment system that bolts onto your wheel without lug nut removal. This attachment system eliminates the hassle of the now obsolete, under the lug mount, commonly referred to as “bolt-on,” that required the removal of lug nuts to install. Our over the lug mount attachment system is now used on heavy trucks nationwide.
Important: some wheel numbers noted may have different wheel stud sizes depending on the vehicle build specifications. Over 90% of the vehicles requiring this set have 22mm wheel studs, less than 10% have 20mm wheel studs.
22mm retention hardware is standard and is what we will ship unless you tell us to send 20mm.
Important: If you have 20mm wheel studs, please be sure to leave us a note at check out.
This required information will enable us to ship the correct mounting hardware for your truck, avoiding a costly needless return to swap out to different sized hardware. Please note that we will not be responsible for additional shipping charges to swap installation hardware if you have 20mm wheel studs, and do not tell us.
You can verify your wheel stud size with a wrench, or caliper. If a 7/8″ wrench fits over the wheel stud, you have 22mm studs. Also, if you place a 13/16” socket over the wheel stud, it will NOT slide over a 22mm
Please verify your wheel stud size, lug nut type, and wheel number before ordering so that we can ship the correct hardware for your vehicle.
Specific fit to wheel numbers: 90614E; 28415; 28484; 88884E or 89920E
To confirm your wheel number, look on the exposed side of the steel wheel, between the lug nuts, or about an inch from the rim edge. Verifying this number is the best way to ensure fit. Ordering by make, model, or year has often proven unreliable due to several factory wheel/tire options typically available for any given vehicle model year.
We do not sell knock-off generic, unbranded wheel covers that loosely fit a broad range of specifications. Squeaks and rattles can be a result of a poor fit of wheel covers over steel wheels.
In contrast, our line of covers matches the precise specifications of O.E.M. wheel numbers. This significant attention to detail has enabled us to set the standard for perfect fitment, thereby ensuring long-term, trouble-free performance.
Verifying that your wheel number, lug nut count, wheel hand hole count, and wheel lug nut type (hub-pilot or stud-pilot) matches our product description will ensure that your new wheel covers will fit perfectly. Please do not rely on vehicle make, model, and year or memory (if the truck or trailer is currently unavailable), as this can result in mistakenly ordering the wrong set of wheel covers. We do not want this to happen to you, so please take the time to physically check your wheels to ensure they match the given description before ordering.
If you need assistance, please contact us, and we will be happy to help. Please include the following information with your correspondence. 1. Your wheel number, including any other stamped rim numbers 2. The vehicle make, model, and year 3. Your wheel lug nut count and hand count
For steel painted wheels only (magnet sticks) – WILL NOT FIT ALUMINUM WHEELS.
Manufactured from our Finest Grade, never rust bright polished stainless steel, and backed by our lifetime warranty. We do not use anything but the best quality stainless to avoid the cracking and yellow tint discoloration that is common to lower quality generic unbranded knock-off covers.
Low quality, unbranded knock-off stainless wheel covers rust and yellow over time and typically do not have a warranty or a minimal one at best.
Eagle Flight® brand covers are backed by our Lifetime Warranty, which serves as your assurance you have purchased the highest quality with the best fit and finish available. We do not sell inferior quality generic knock-off wheel rim covers. © autoenhance.com All Rights Reserved – including images, text, and product page titles.
$308.70
3 in stock
The price is for one rear Genuine Eagle® rim cover as shown – not a pair.
This Genuine Eagle® rear wheel rim liner cover fits the hub-piloted steel
dual rear wheel size 22.5″x 7.5″ or 8.25″ with eight lugs, and
four-hand holes with a 275mm bolt circle and 22mm wheel studs.
Important Note: The stamped wheel width must be verified before ordering. This cover will not fit 22.5″ x 6.75″ wheels.
It includes mounting hardware, installation tool, trademark Eagle resin center emblem, and shipping. Please be informed that we will no longer process orders for shipment outside of this area, and we do not ship to P.O. boxes, sorry.
Hub-piloted steel wheels have a built-in washer on the backside of the lug nuts – see the image.
This cover features our state of the art over the lug attachment system that bolts onto your wheel without lug nut removal. This attachment system eliminates the hassle of the now obsolete, under the lug mount, commonly referred to as “bolt-on,” that required the removal of lug nuts to install. Our over the lug mount attachment system is now used on heavy trucks nationwide.
Important: some wheel numbers noted may have different wheel stud sizes depending on the vehicle build specifications. Over 90% of the vehicles requiring this set have 22mm wheel studs, less than 10% have 20mm wheel studs.
22mm retention hardware is standard and is what we will ship unless you tell us to send 20mm.
Important: If you have 20mm wheel studs, please be sure to leave us a note at check out.
This required information will enable us to ship the correct mounting hardware for your truck, avoiding a costly needless return to swap out to different sized hardware. Please note that we will not be responsible for additional shipping charges to swap installation hardware if you have 20mm wheel studs, and do not tell us.
You can verify your wheel stud size with a wrench, or caliper. If a 7/8″ wrench fits over the wheel stud, you have 22mm studs. Also, if you place a 13/16” socket over the wheel stud, it will NOT slide over a 22mm
Please verify your wheel stud size, lug nut type, and wheel number before ordering so that we can ship the correct hardware for your vehicle.
Specific fit to wheel numbers: 90614E; 28415; 28484; 88884E or 89920E
To confirm your wheel number, look on the exposed side of the steel wheel, between the lug nuts, or about an inch from the rim edge. Verifying this number is the best way to ensure fit. Ordering by make, model, or year has often proven unreliable due to several factory wheel/tire options typically available for any given vehicle model year.
We do not sell knock-off generic, unbranded wheel covers that loosely fit a broad range of specifications. Squeaks and rattles can be a result of a poor fit of wheel covers over steel wheels.
In contrast, our line of covers matches the precise specifications of O.E.M. wheel numbers. This significant attention to detail has enabled us to set the standard for perfect fitment, thereby ensuring long-term, trouble-free performance.
Verifying that your wheel number, lug nut count, wheel hand hole count, and wheel lug nut type (hub-pilot or stud-pilot) matches our product description will ensure that your new wheel covers will fit perfectly. Please do not rely on vehicle make, model, and year or memory (if the truck or trailer is currently unavailable), as this can result in mistakenly ordering the wrong set of wheel covers. We do not want this to happen to you, so please take the time to physically check your wheels to ensure they match the given description before ordering.
If you need assistance, please contact us, and we will be happy to help. Please include the following information with your correspondence. 1. Your wheel number, including any other stamped rim numbers 2. The vehicle make, model, and year 3. Your wheel lug nut count and hand count
For steel painted wheels only (magnet sticks) – WILL NOT FIT ALUMINUM WHEELS.
Manufactured from our Finest Grade, never rust bright polished stainless steel, and backed by our lifetime warranty. We do not use anything but the best quality stainless to avoid the cracking and yellow tint discoloration that is common to lower quality generic unbranded knock-off covers.
Low quality, unbranded knock-off stainless wheel covers rust and yellow over time and typically do not have a warranty or a minimal one at best.
Eagle Flight® brand covers are backed by our Lifetime Warranty, which serves as your assurance you have purchased the highest quality with the best fit and finish available. We do not sell inferior quality generic knock-off wheel rim covers. © autoenhance.com All Rights Reserved – including images, text, and product page titles.
| Weight | 22.00 lbs |
|---|---|
| Dimensions | 24.00 × 24.00 × 9.00 in |
| Compatible Wheel Diameter | |
| Type | |
| Features | |
| Number in Pack | |
| Manufacturer Part Number | |
| Placement on Vehicle | |
| Brand |
Our D.O.T. approved, extensive wheel cover line is widely known for industry-leading quality, lasting durability, and precision fit. Eagle Flight® simulators are manufactured from the highest quality polished stainless steel that rivals chrome in appearance, and will never rust, crack, or turn yellow. Every set we offer will provide many years of maintenance-free great looks, backed up with our Lifetime Warranty. We have been in the wheel cover business since 1979.
We have a full line available in sizes ranging from 16″ through 24.5″ to fit nearly every make and model van, truck and trailer on the road today. Installation is simple as 1-2-3 if you choose our Easy No Lug Removal sets. Most applications are available with no lug removal, bolt-on retention.
We also offer Universal Wheel Simulators that will fit virtually all 17.5″, 19.5″, and 22.5″ wheels, including demountable (spoke) wheels. We are proud to be one of the largest manufacturers of wheel simulators in the United States, with both single wheel and dual wheel applications. If you have a question, please feel free to contact us.
Additionally, Eagle Flight manufactures various licensed OEM covers. We are proud of the fact that in today’s world of low quality unbranded stainless knock-offs, we have earned the right to produce licensed OEM wheel covers to vehicle manufacturers exacting specifications.
We offer free shipping within the contiguous 48 states of the USA. Outside of this area, please contact us to get a shipping quote for your location if you do not see the shipping calculator on this page.
Most applications are available with No Lug Removal bolt-on retention. All that you do is position the wheel simulators on your wheel and install the included jam nuts onto the stud protruding from your lug nut. Some applications require using included stud extenders, but installation is always quick and secure.
Our covers include everything noted in the product description section of this page.
Please, take the time to confirm that your rims match our description before ordering for a precise fit.
Yes, replacement parts are available for our simulator sets by emailing us your contact and vehicle information.
All our Eagle Flight® wheel simulators come with a Genuine Eagle Lifetime Finish Warranty when purchased directly from us. After ordering, you will receive a separate receipt from us documenting your purchase, which also serves as validation of your warranty.
We are always happy to help by verifying you are ordering correctly if in doubt. In this case, please email us all of the following information: your wheel number (see picture), make, model, year, wheel size, lug nut count, and hand hole count (see picture) and we will review and advise. We can also review clear emailed photos of your wheels when necessary. Our goal is to deliver what you order, promptly, so that you will receive covers that fit correctly, the first time. Our descriptions are precise to ensure that will be the case so that you will 100% satisfied with every purchase you receive from us. Our covers have a lifetime warranty, will look terrific, and provide trouble-free performance for the life of your trailer, truck, or van. © autoenhance.com All Rights Reserved – including images, text, and product page titles. QC1
Copyright 2025 © Automotive Enhancement | Design By Beverly Hills FL Website Service
