Description
These Genuine Eagle® rim covers fit 22.5″ X 6.75″, 22.5″ x 7.5″, 22.5 X 8.25″ Stud-piloted painted steel wheels with eight lugs and four vent holes that have a 275mm bolt circle with a noted wheel number.
Note: Stud-piloted steel wheels DO NOT HAVE a built-in integrated washer on the backside of the lug nuts. To ensure fitment, please review our lug nut photos, and verify your lug nut type at your vehicle. There will be an additional charge if a hardware swap becomes necessary.
Fits Accuride and Maxion brand steel painted front wheels (a magnet sticks) Specific fit to wheel numbers: 28484; 88884E or 89920E
The included mounting hardware is for 22mm wheel studs. Please verify at your vehicle your wheel stud size with a caliper or metric wrench before ordering to ensure mounting hardware fitment.
Important: Your vehicle could have 20mm or 22mm wheel studs! If your vehicle has 20mm wheel studs, the attachment hardware that ships with this cover will Not Fit. In that case, please contact us, and we’ll be happy to direct you to the correct item.
Alternate Ways To Determine Your Wheel Stud Size:
A 13/16″ socket will Not Slide over a 22mm wheel stud, indicating you have 22mm wheel studs.
You can also measure the wheel lug nuts – 20mm wheel studs use 30mm lug nuts. 22mm wheel studs have 33mm lug nuts.
The price is for one set of 2 for the front steer axle, as shown. It includes our Lifetime Finish Warranty, mounting hardware, installation tool, Eagle trademark resin center emblems, and shipping within the contiguous 48 U.S.A. states. Please be informed that we will no longer process orders for shipment outside of this area, and we do not ship to P.O. boxes.
These covers feature our state-of-the-art over lug attachment system that bolts onto your wheel without lug nut removal. This state-of-the-art attachment system eliminates the mounting hassle of the now obsolete under the lug mount, typically referred to as bolt-on, which required removal of lug nuts to install. Our D”.O.T. compliant, over the lug” mount system is now used widely on heavy commercial trucks.
Necessary: Please verify your wheel size, wheel number, wheel stud size, lug nut count, and wheel hand hole count before ordering to ensure fitment.
To check your wheel number, look on the steel wheel’s exposed side, between the lug nuts, or about an inch from the rim edge.
Verifying this number is the best way to ensure fit. Ordering by make, model, or year has often proven unreliable due to several factory wheel/tire options typically available for any given vehicle model year.
We do not sell knock-off generic, unbranded wheel covers that loosely fit a broad range of specifications. Squeaks and rattles can be a result of a poor fit of wheel covers over steel wheels. In contrast, our line of covers has match the specifications of actual wheel numbers in use on given make, model, and year vehicles. This significant attention to detail has enabled us to provide a complete line of wheel covers that set the standard for precise fitment to O.E.M. wheel specifications, thereby ensuring our product’s long-term, trouble-free performance.
Verifying that your wheel stud size, wheel number, lug nut count, wheel hand hole count, and wheel lug nut type (hub-pilot or stud-pilot) match our product description will ensure your new wheel cover will fit perfectly.
Please do not rely just on vehicle make, model, and year or memory (if the truck or trailer is currently not available), as this can result in mistakenly ordering the wrong set of wheel covers. We do not want this to happen to you, so please take the time to physically check your wheels to ensure they match the given description before ordering.
If you need assistance, please contact us, and we will be happy to help. Please include the following information in your correspondence. 1. Your wheel number, including any other stamped rim numbers 2. The vehicle
make, model, and year 3. Your wheel lug nut count and hand count
For steel painted wheels only (magnet sticks) – WILL NOT FIT ALUMINUM WHEELS.